Multidisciplinary Minors

Advanced Topics: At least 8 credits selected from CSSE453 Topics in AI, CSSE463 Image Recognition, or any upper level CSSE or MA course with a significant AI content and approved by the AI minor advisor.

Ethics: PHIL H202 Business & Engineering Ethics.

AI Project: A project with a significant AI component is required. This may be done in any discipline. Projects must be approved by the AI minor advisor. Projects must include both a written report and a public presentation, and be made available for future use. Students may meet this requirement in three ways: (1) A student may complete a 4-credit independent study, approved by the AI minor advisor; (2) A student may begin the project in a course and then extend and document the project and make a public presentation during an independent study approved by the AI minor advisor; (3) A student may complete an approved senior thesis or project involving AI and substitute a senior thesis or project course for the independent study.

Note: At most 8 credits of the AI course work (Basics, Machine Learning, and Advanced Topics) can be used to satisfy degree requirements for any major or any other minor sought by the student. The remaining credit hours can only be used to satisfy technical or free electives within the primary major.

MULTIDISCIPLINARY MINOR IN COGNITIVE SCIENCE

The Multidisciplinary Minor in Cognitive Science has the following requirements:

Cognitive Psychology (PSYC S210)
Introduction to Software Development (CSSE 120)
Philosophy of Mind (PHIL H401) or Philosophy of Science (PHIL H402) or Human Nature (PHIL H403). The chosen course may not also satisfy requirement #4.
Three additional courses from the list below. At least two courses must be from the same group.
Substitutions may be made with the approval of the Minor Advisor.

Courses:

Mind and Behavior group

ECON S356 Game Theory
PHIL H401 Philosophy of Mind
PHIL H403 Human Nature
PSYC S100 Introduction to Psychology
PSYC S110 Applied Psychology
PSYC S310 Methods for Studying Human Behavior

Computation and Artificial Intelligence group

CSSE 313 Artificial Intelligence
CSSE 314 Bio-Inspired Artificial Intelligence
CSSE 453 Topics in Artificial Intelligence
CSSE 463 Image Recognition
ECE 497 Evolutionary Robotics
PSYC S410 Computational Psychology
MA 416/CSSE 416 Deep Learning

Neuroscience group

BE 324 Neural and Endocrine Systems Physiology with Applications
BE 520 Introduction to Brain Machine Interfaces
BE 543 Neuroprosthetics

MULTIDISCIPLINARY MINOR IN DATA SCIENCE
Any student may obtain a Multidisciplinary Minor in Data Science by taking the following courses:

Introductory Statistics Course (4 credit hours):
One of the following courses

MA223 Engineering Statistics I
MA382 Introduction to Statistics with Probability

Introductory Computer Science Courses (8 credit hours):

CSSE120 Introduction to Software Development
CSSE220 Object Oriented Software Development

Electives (16 credit hours):
Two courses from the list below:

MA386 Statistical Programming
MA384 Data Mining
CSSE230 Data Structures & Algorithm Analysis

A minimum of two additional course from the list below: (See degree separation requirement below.)

BMTH312 Bioinformatics
CSSE313 Artificial Intelligence
CSSE314 Bio-Inspired Artificial Intelligence
CSSE315 Natural Language Processing
CSSE333 Database Systems
CSSE/MA415 Machine Learning
CSSE/MA416 Deep Learning
CSSE433 Advanced Database Systems
CSSE434 Introduction to the Hadoop Ecosystem
CSSE463 Image Recognition
CSSE481 Web-Based Info Systems
CSSE335/MA335 Introduction to Parallel Computing
ECON S451 Econometrics
MA384 Data Mining
MA386 Statistical Programming
MA482 Biostatistics
MA483 Bayesian Data Analysis
MA485 Applied Linear Regression
PH327 Thermodynamics and Statistical Mechanics

Notes and limitations on requirements:

Degree Separation Requirement: The Multidisciplinary Minor in Data Science must be separated from any other minor and the named required courses of any major by a minimum of 16 credit hours. Exceptions to this requirement must be approved by the minor advisor for Data Science and the heads of both the Department of Mathematics and the Department of Computer Science and Software Engineering.
Electives not listed above may be substituted with other courses with the approval of the minor advisor for Data Science.
The minor plan of study must be approved by the minor advisor for Data Science and the student’s advisor.

MINOR IN ENTREPRENEURIAL STUDIES

In a globally competitive environment, the need to rapidly transition from an innovative idea to a viable product necessitates that 21st Century engineers and scientists think and act in an entrepreneurial manner. Not everyone must be interested in starting a technology-based company, but it is important to understand the business requirements of technology commercialization. These skills help students become leaders.

To prepare students for this new workplace, the Department of Engineering Management offers a minor in Entrepreneurial Studies to complement their undergraduate technical education. The five course curriculum (20 credits) introduces students to the fundamentals of an entrepreneurial mindset.

Two required courses (total of 8 credits):

EMGT 330 - Introduction to Engineering Management
EMGT 432 or 532 - Technical Entrepreneurship

Three elective courses (total of 12 credits) from the following:

EMGT 100 - Introduction to Entrepreneurship
EMGT 175 - Personal Finance
EMGT M520 - Accounting for Technical Managers
EMGT M521 - Financial Management in a Technical Envoronment
EMGT M523 - Marketing in New Product Development
EMGT 526 - Innovation Management & Forecasting
EMGT E527 - Project Management
ECON S151 - Introduction to Microeconomics
ECON S152 - Introduction to Macroeconomics
ECON S352 - Corporate Finance
ECON S350 - International Trade & Globalization
ECON S355 - International Finance
PHIL H202 - Business and Engineering Ethics

Note: There are no prerequisites for the EMGT courses, but the HSSA courses have prerequisites. Please refer to the course catalog.

With approval from the Department Head of Engineering Management, course substitutions may be considered to align with a student’s professional aspirations. No more than one course may be transferred in to count toward the minor.

MULTIDISCIPLINARY MINOR IN IMAGING

Imaging concerns the collection, manipulation, analysis, generation, understanding and processing of images. It includes computer graphics, computer vision, optical imaging and filtering, signal processing and aspects of artificial intelligence and machine learning. Imaging is used across all areas of science and engineering, for example, in the vision systems in self-driving cars, in robotics, and in automating medical diagnostics, even to the point of detecting a person’s pulse from a video of their face.

�鶻��Ʒ offers a multidisciplinary minor in imaging. The minor requires 24 credits (6 courses): three required courses and three imaging electives from the list below. Since imaging is a multidisciplinary minor, at least 12 of the 24 credits must be courses that are not named required courses for the student’s major.

Students choose a track to pursue. Each track allows the student to gain depth in a different area. Each has its own required courses and suggested electives (although any electives from the list below are acceptable).

Track 1: Medical Imaging
Expected majors: BE, EE, CPE, PH, OE, EP
Required courses: ECE584/BE541/OE584, ECE480, BE321 or ECE380
Plus three electives from the Imaging Electives list below.
Recommended electives: BE435/OE435, MA439, CSSE463

Track 2: Image Recognition
Expected majors: CS, SE, PH/OE/EP, EE/CPE, MA, ME
Required courses: ECE582/OE537, CSSE463, CSSE/MA416 Deep Learning
Plus three electives from the Imaging Electives list below.
Recommended electives: CSSE/MA415 Machine Learning, ECE480/OE437, CSSE461

Track 3: Acquisition of Images
Expected majors: ECE, PHOE, BE
Required courses: ECE480/OE437, PH405, OE295
Plus three electives from the Imaging Electives list below.
Recommended electives: OE480, OE392

Track 4: Creative Imaging
Expected majors: CS/SE, ECE, MA
Required courses: ARTS H244, CSSE351, ECE480
Plus three electives from the Imaging Electives list below.
Recommended electives: ARTS H142, ARTS H242, MA323

Imaging Electives (choose any 12 credits that are not required for your track, as long as at least 12 of the 24 credits for the minor are not named, required courses for your major)

ARTS H142 Beginning Drawing

ARTS H242 Visual Arts in Civilization

ARTS H244 Design and Color

BE321 Biomedical Signal Processing or ECE380 Discrete-Time Signal Processing (only one can be taken as a minor elective)

BE435/OE435 Biomedical Optics

CSSE313 Artificial Intelligence

CSSE351 Computer Graphics

CSSE/MA416 Deep Learning

CSSE/MA415 Machine Learning

CSSE451 Advanced Computer Graphic

CSSE461 Computer Vision

CSSE463 Image Recognition

ECE480/OE437 Introduction to Image Processing

ECE580 Digital Signal Processing

ECE582/OE537 Advanced Image Processing

ECE584/BE541/OE584 Medical Imaging Systems

MA323 Geometric Modeling

MA371 Linear Algebra or MA373 Applied Linear Algebra

MA439 Mathematical Methods of Image Processing

NE406/NE506 Semiconductor Devices & Fabrication

OE295 Photonics Devices and Systems

OE392 Linear Optical Systems

OE480/OE580 Optical System Design

OE592 Fourier Optics and Applications

PH431 Advanced Observational Astronomy (2cr)

Any special topics course or independent study in any major that involves imaging (must be approved by the Imaging Program Director).

MINOR IN INTERNET OF THINGS

Internet of Things (IoT) is a broad field of study which has applications across many disciplines. The technologies which enable IoT range from material science for sensors and energy harvesting applications to complex real-time analysis of large, aggregated data sets. This encompasses fields such as embedded system design, sensor design, energy harvesting and storage, networking, wireless communications, distributed systems, databases, edge and cloud computing, machine learning, data analysis, security, and privacy. The applications for Internet of Things include agricultural monitoring and automation, infrastructure monitoring, traffic monitoring and control, environmental monitoring, smart retail logistics, industrial monitoring and automation, smart homes, smart cities, mobile health, and intelligent environments.

Students in any degree program are eligible for the minor. To earn the Minor in Internet of Things, a student must complete a minimum of 24 credit hours in a course plan approved by an internet of things minor advisor.

Required Courses

For ECE/CSSE majors : ECE 436 Internet of Things (4 cr)

For all other majors : MDS 210 Introduction to Internet of Things (4 cr)

Plus 20 additional credit hours in a plan approved by one of the minor advisors in collaboration with the student to suit their particular interests and field of study. To provide students with a breadth of knowledge in the Internet of Things, this plan should include courses in the areas of: (1) hardware design of end devices, including sensors and actuation; (2) software design and data analysis; and (3) networks and security. The guidelines are designed to be flexible to accommodate students from any major; the tables below provide some examples of courses which fit these categorizations. No more than 8 credit hours from a named required course for the student’s major may be counted toward the minor requirements.

A sampling of courses which could be used to satisfy minor requirements This is not an exhaustive list. Students may propose alternate courses which align with the intent of this minor.

Hardware design - include at least one course in this category

Course	Description	Hours
BE211	Circuits, Sensors, and Measurements	3
BE321	Biosignal Processing	4
CHE340	Process Control	4
CHE405 / ECE416 / EP410 / ME416	Introduction To Mems: Fabrication & Applications (cross-listed)	4
CHEM420	Electronics for Scientists	4
CSSE435 / ME435	Robotics Engineering (cross-listed)	4
ECE230	Introduction to Embedded Systems	4
EP408 / EP508	Microsensors and Actuators	4
MDS310	Appropriate Technology for Developing Communities	4
ME430	Mechatronic Systems	4

Software design and data analysis - include at least one course in this category

Course	Description	Hours
BMTH312	Bioinformatics	4
CHE310	Numerical Methods for Chemical Engineers	4
CHE525	Process Analytics	4
CSSE386	Data Mining with Programming	4
MA335 / CSSE335	Introduction to Parallel Computing (cross-listed)	4
MA384	Data Mining	4
ME447	Visualizing Data	4

Networks and security - include at least one course in this category

Course	Description	Hours
CSSE132	Introduction to Computer Systems	4
CSSE140 / CSSE141	Practical Security I / II	1
CSSE340	Foundations Of Cybersecurity	4
CSSE432	Computer Networks	4
ECE310	Communication Systems	4
ECE312	Communication Networks	4
MA479 / CSSE479	Cryptography	4

As is the case with any minor at Rose-Hulman, the Institute does not guarantee to any student that the courses that fulfill the minor will be available in all quarters to suit the student’s plan of study.

MINOR IN MATERIALS SCIENCE AND ENGINEERING

Materials science and engineering is a broad field of study. As the name implies, it encompasses foundational knowledge from the sciences (e.g. physics, chemistry, and biology) and it includes the engineering application of this knowledge to create new materials and to select, modify, and combine existing materials in novel and useful ways. Developments in materials science and engineering are critical to success in many areas of science and technology. The relationship between the structure, processing, and properties of materials is central to the discipline, and therefore the courses in this minor teach students about one or more of these areas. �鶻��Ʒ offers a Minor in Materials Science and Engineering to recognize students who have gained experience in these areas while at Rose-Hulman. Students in any degree program are eligible for this minor, except students working toward the minor in Solid State Physics/Materials Science.

To earn the Minor in Materials Science and Engineering, a student must complete a minimum of 24 credit hours according to the guidelines below. These guidelines are designed to be flexible in order to accommodate students from different majors across the Institute. Consequently, some courses are listed in multiple categories even though any given course may only be counted once toward the minor. In some cases, a prerequisite may be waived if the instructor determines that the student has sufficient background knowledge from previous coursework taken in other departments. Prerequisites are included for reference but are subject to change; the course catalog contains the official prerequisites.

(1) One of the following introductory courses (or course sequences):

Course	Description	Hours	Prerequisites
BE 233 and BE 315	Biomaterials & Biomedical Engineering Lab	3 2	None BE 232, BE 233, BE 314*
CHE 315	Materials Science and Engineering	4	CHEM 115
ME 328	Materials Engineering	4	CHEM 111

Course

Description

Hours

Prerequisites

BE 233
and
BE 315

Biomaterials &

Biomedical Engineering Lab

None

BE 232, BE 233,
BE 314*

CHE 315

Materials Science and Engineering

CHEM 115

ME 328

Materials Engineering

CHEM 111

*corequisite

(2) A total of 20 additional credit hours from one or both of the following categories. Any course required for a student’s major (excluding elective courses required for the major, and other exceptions as specified in the footnotes) does not count toward these 20 credit hours, nor does any course taken to satisfy requirement (1) above.
(i) A minimum of 12 credit hours of the following elective courses:

Course	Description	Hours	Prerequisites
BE 233	Biomaterials	3
BE 560	Tissue-Biomaterial Interactions ¹	4	BE 361**
BE 597 & Other BE	Special Topics, requires approval of minor advisor ¹	1-4	May count more than one relevant course toward minor
CE 320	Civil Engineering Materials ²	4
CHE 315	Materials Science and Engineering ³	4	CHEM 115
CHE 441	Polymer Engineering	4	CHE 404*, and CHEM 251
CHE 515	Nanomaterials Science & Engineering	4	CHE 315 or ME 328
CHEM 581	Polymer Chemistry ¹	4	CHEM 252, junior class standing. Offered every 2-3 years
CHEM 582	Physical Properties of Polymeric Materials ¹	4	CHEM 361 or CHEM 360; Offered every 2-3 years
CHEM 270 & CHEM 470 & CHEM 570	Special Topics in Chemistry		May count more than one relevant course toward minor
ECE 416	Introduction to MEMS: Fabrication & Applications (cross-listed with CHE 405, EP 410, and ME 416)	4	Junior or Senior class standing
Course	Description	Hours	Prerequisites
ECE 419	Advanced MEMS: Modeling & Packaging (cross-listed with CHE 419 and EP 411)	4	EP 410 or equivalent course
ECE 543	Electromagnetic Metamaterials	4	ECE 341
EP 280	Intro to Nano-Engineering	4
EP 330	Material Failure	4	PH 112
EP 380	Nanotechnology, Entrepreneurship & Ethics	4	EP 280
ME 328	Materials Engineering ³	4	CHEM 111
ME 414	Materials Selection in Mechanical Design ¹	4	EM 204
ME 423	Fatigue ¹	4	EM 204
ME 424	Mechanics of Composites ¹	4	EM 204 and ME 328
ME 428	Materials Research and Instrumentation ¹	4	CHEM 111 and Jr Standing
ME 517	Mechanics of Metal Forming ¹	4	EM 204
ME 497 & Other ME	Special Topics, requires approval of minor advisor. ¹		May count more than one relevant course toward minor
OE 360	Optical Materials	4	PH 255 and PH 316
PH 255	Foundations of Modern Physics	4	PH 113 and MA 211*
PH 405	Semiconductor Materials & Applications	4	PH 113 or PH 255 or PH 265
PH 407	Solid State Physics	4	PH 255 or PH 265
PH 440	X-rays and Crystalline Materials	4	PH 255 or PH 265
With permission of a minor advisor, up to four credit hours of PH 113 OR EM 204 OR BE 222	Physics III ⁴ Or Statics & Mechanics of Materials II ⁴ OR Mechanics of Materials ⁴	4	PH 112 and MA 112 and MA 113* Or EM 121 Or BE 132
With permission of a minor advisor, up to four credit hours of independent study and/or self-directed research		≤ 4

¹ Tentative plans for electives can be found on department-specific my.rose-hulman.edu pages.

² CE majors may count CE 320 toward fulfillment of the minor even though it is in category (2)

³ CHE 315 and ME 328 cannot both count toward fulfillment of the minor

⁴ PH 113 or EM 204 or BE 222 cannot be taken as a terminal course. A materials elective that requires PH 113 or EM 204 or BE 222 as a prerequisite must also be taken in fulfillment of minor requirements.

*corequisite course; **consent of instructor; *** or concurrent registration

(ii) A maximum of 8 credit hours of the following elective courses that focus on mechanics of materials:

Course	Description	Hours	Prerequisites
EM 505	Theory of Elasticity	4	EM 203 or EM 204
ME 422	Finite Elements for Engineering Applications	4	EM 204
ME 522	Advanced Finite Element Analysis	4	ME 422
CE 523	Advanced Solid Mechanics	4	Grad or Consent of instructor

The Departments of Mechanical Engineering, Chemical Engineering, and Biology and Biomedical Engineering each have their own Materials Science and Engineering minor advisor.

MULTIDISCIPLINARY MINOR IN ROBOTICS

Robotics is a fast-growing field that is inherently multidisciplinary, incorporating mechanical systems, electrical systems, and software. It includes mobile robotics, mechatronics, and assistive technologies. �鶻��Ʒ offers a multidisciplinary minor in robotics to recognize students who have gained experience in these areas while at Rose-Hulman.

To earn the Multidisciplinary Minor in Robotics, a student needs to complete the three courses listed below plus additional courses listed below per the student’s major.

Courses that all majors must complete [12 credit hours]

CSSE120 Introduction to Software Development ^1,2
ME435/CSSE435 Robotics Engineering
ECE425 Introduction to Mobile Robotics

¹Note for ME and BE students: CSSE120 can be used as a course substitution for the required introduction to programming course (ME123 or BE100). However, ME and BE students may take both the required class AND CSSE120. CSSE120 will then count as a free elective.
²Note for ENGD students: CSSE120 is taught within ENGD 110/120.

In addition to the courses listed above students completing the robotics minor need to complete the courses below that apply to their major. (Students with a double major or double degree may choose which major to use. If a student decides to switch majors, that student must complete a track below appropriate for their final degree. These degree requirements are evaluated only at the time of your graduation.)

(1) CS and SE majors - Additional required courses:

ME430 Mechatronic Systems
8 credits of Robo Electives (see list below)

(2) CPE majors - Additional required courses:

CSSE463 Image Recognition
ECE320 Linear Control Systems ³
8 credits of Robo Electives (see list below)

³Note, the list of additional required CPE courses appears to be 1 course longer than other tracks, but CPE students are required to take either Linear Control Systems (ECE320) or Discrete-Time Signals and Systems (ECE380) already, so the requirement to take ECE320 should not cause the CPE track to be any longer.

(3) EE majors - Additional required courses:

CSSE220 Object-Oriented Software Development
8 credits of Robo Electives (see list below)

(4) ME majors - Additional required courses:

CSSE220 Object-Oriented Software Development
ME404 Advanced Design of Mechanisms -or- ME445 Robot Dynamics and Control
ME406 Control Systems ⁴
4 credits of Robo Electives (see list below)

⁴Note, the list of additional required ME courses appears to be 1 course longer than other tracks, but ME students are required to take either Control Systems (ME406) or Vibration Analysis (EM406) already, so the requirement to take ME406 should not cause the ME track to be any longer.

(5) ENGD majors - Additional required courses:

ES214 Mechanical Systems
ES205 Analysis and Design of Engineering Systems
ME406 Controls
ME430 Mechatronic Systems
MDS410/20/30 Multidisciplinary Capstone - ENGD majors should select projects that build on robotics learning from earlier courses.

(6) For majors not listed above - Additional required courses:

CSSE220 Object-Oriented Software Development
ME430 Mechatronic Systems
BE350 or ECE 320 or ME 406 [or a Controls course from any major] ⁵
4 credits of Robo Electives (see list below)

⁵ For BE majors, a controls course will fill an area requirement. So, much like the ME track, the requirement to have a controls course should not cause this track to be longer for BE majors than tracks for other majors.

Robotics Electives

Students choose Robotics Electives from the list below subject to the restrictions that a student’s Robotics Elective courses(s) cannot be any course listed above as an additional required course for the student’s major, and cannot be a course listed as a named requirement for the student’s major.

BE350 Biocontrol Systems
BE520 Brain Machine Interfaces
BE543 Neuroprosthetics
CSSE286 Machine Learning
CSSE313 Artificial Intelligence
CSSE480 Cross Platform Development
CSSE461 Computer Vision
CSSE463 Image Recognition
CSSE490 Swarm Intelligence
CSSE290/490 Teamwork and Robotics
ECE320 Linear Controls
ECE300 Continuous Time Signals and Systems
ECE414 Wireless Systems
ECE420 Discrete-time Control Systems
ECE480/PH437 Image Processing
ECE483 Digital Signal Processing System Design
ECE497 Advanced Mobile Robotics
ECE582/OE537 Advanced Image Processing
ECE583 Pattern Recognition
PHYC S410 Computational Psychology
MA/CSSE415 Macihne Learning
MA/CSSE416 Deep Learning
ME304 Introduction to the Design of Mechanisms
ME404 Advanced Design of Mechanisms
ME406 Control Systems
ME445 Robot Dynamics and Control
ME497 Design of Mechanisms I
ME497 Design of MEchanisms II
ME497 Industrial Controls
ME497 Three Dimensional Dynamics
ME506 Advanced Control Sys
ME518 Advanced Kinematics
EM502 Advanced Dynamics
EP408 Microsensors
CSSE490/ME497/ECE497 Robotics Studio
Independent study courses in robotics [requires approval BEFORE the course is taken]

MINOR IN SIX SIGMA

Six Sigma has been incorporated by statewide and national companies involved in manufacturing, health care, and service industries. The Six Sigma process has also been used to address environmental and sustainability concerns, such as recycling and food waste/share programs. This minor is designed for students who are interested in the Six Sigma statistical methodology for process improvement and quality enhancement. Students completing the minor will develop their analytical, managerial, and statistical skills, and gain a competitive advantage in the workplace.

Minor Advisor: Dr. Diane Evans

Six Sigma Minor versus Six Sigma Certification

Any student may obtain a minor in Six Sigma by taking six or more courses (24 credit hours) from the lists below. To additionally obtain a Green Belt Certification, the student must pass an external Six Sigma exam and submit a Six Sigma Green Belt project that must be approved by the Six Sigma minor advisor.

Introductory Statistics Course (4 credit hours):

One of the following courses:

MA223 Engineering Statistics I
MA382 Introduction to Statistics with Probability

Note: If MA 381 is taken before MA223/MA382, it is strongly recommended the student take MA382 instead of MA223.

Quality and Six Sigma Courses (12 credit hours):

EMGT445 Quality Methods
EMGT446 Statistical Methods in Six Sigma
EMGT447 Six Sigma in Practice

Supporting Coursework (8 credit hours):

Two courses selected from the following list. Courses not on this list may count towards the minor if approved by the minor advisor.

EMGT330 Introduction to Engineering Management
EMGT335 Design and Value Creation
EMGT427 Project Management
EMGT462 Risk Analysis and Management
EMGT467 Economic Analysis of Engineering Projects
EMGT472 Reliability Engineering
EMGT E524 Production/Operations Management
EMGT E527 Project Management
EMGT 548 Six Sigma BoK
MA485 Applied Linear Regression
MA487 Design of Experiments
ME412 Lean Manufacturing

External Examination for Six Sigma Green Belt Certification
     • Take an external exam that will give students an objective credential from a recognized agency (IISE).
     • Students who pass the EMGT548 IISE SSGB exam will be reimbursed for the exam (while funding is available)
     • If the student intends to obtain a minor only, then they do not need to take the external exam.

Approved Six Sigma Green Belt Project for Six Sigma Green Belt Certification
• The student must submit a Six Sigma Green Belt project to be approved by the Six Sigma advisor to obtain their certification.
• If the student intends to obtain a minor only, then they do not need to submit a project to be approved by the Six Sigma advisor.

Notes and Limitations on Requirements
1. Almost all students are required to take either MA223 or MA382 as a requirement for their major; therefore, only five "extra courses” are required for most students.
2. Electives not listed above may be substituted with other courses with the approval of the minor advisor for Six Sigma.
3. All minors must be approved by the minor advisor. The department has a form for the planning and approval of a minor.
4. All certifications must be approved by the minor advisor. The department has a form for the planning and approval of a certificate.

SUSTAINABILITY MINOR

Core Courses (12 credits)
1. HUM H130 Introduction to Sustainability (4 credits)
2. BIO 107 Introduction to Environmental Science (4 credits)
3. ECON S151 Introduction to Microeconomics (4 credits) or ECON S152 Introduction to Macroeconomics (4 credits)
Three electives (4 credits each = 12 credits) Students must take a total of at least four credits from a list of Cultural and Social courses and at least four credits from a list of Technical and Scientific courses, with the remaining four credits covered in either category. Alternatively, students can design their own plan of study for elective courses that suit their interests and field of study with approval of the Sustainability Minor Advisor.
1. Cultural and Social (HSSA requirement)
  ANTH S101 Introduction to Anthropology
  ECON S351 Environmental Economics
  ENGL H349 Nature and Literature
  HIST H322 Disasters and Modern Society
  HIST H425 Cities and Technology in the Industrial Age
  PHIL H201 Bioethics
  PHIL H202 Business and Engineering Ethics
  RELG H201 Nature and Religion
2. Technical and Scientific (Discipline Specific Tech Elective)
  BIO220 Microbiology (prerequisite: BIO110)
  BIO320 Ecology (prerequisite: BIO130)
  CE250 Sustainable Civil Engineering Design (2 credits)
  CE460 Introduction to Environmental Engineering
  CE471 Water Resources Engineering
  CHE465 Energy and the Environment
  CHEM535 Toxicology for Chemists
  CHEM556 Green Chemistry
  CSSE241 Computing in a Global Society
  ECE371 Sustainable Energy Systems (prerequisite: ECE204)
  EMGT587 Systems Engineering
  ME408 Renewable Energy (prerequisite: ES212
  MDS201 Global Engineering and the Social Context I

MULTIDISCIPLINARY MINOR IN SYSTEMS ENGINEERING

Systems Engineering is an engineering discipline whose responsibility is to create and execute an interdisciplinary process to ensure that all system stakeholders' needs are satisfied in a high-quality, trustworthy, cost-efficient, and schedule compliant manner throughout a system's entire life cycle. The field of systems engineering provides a broad spectrum of tools that can be used to help engineers manage complexity, predict and address risk, ensure safety, gather and manage information, and provide solutions with greater value to the intended stakeholders. The Minor in Systems Engineering aims to provide students with a broad exposure to systems engineering concepts and tools. Hence, they are better prepared to integrate knowledge and collaborate effectively across different disciplinary domains to create value for their systems and ensure long-term system success.

Minor Advisor: Dr. Eva Andrijcic

Students are required to take the following courses:

EMGT E564 – Systems Architecture
EMGT 583 – Management Information Systems
EMGT 584 – Systems Thinking and Evaluation

Additionally, students are required to attend three hours of systems-related seminars offered at Rose-Hulman or by an external organization. Examples of appropriate seminars would include INCOSE Great Lakes systems seminars, which are offered virtually every month and are open to students, seminars or presentations offered at Rose-Hulman, which address some aspect of the systems engineering process. Finally, students are required to document their attendance by writing a brief reflection about what they have learned. All three reflections must be reviewed and approved by the minor advisor prior to minor completion.

Students must take additional three courses from the following list of electives:

EMGT 472 – Reliability Engineering
EMGT E572 – Reliability Engineering
EMGT 427 – Project Management
EMGT E527 – Project Management
EMGT 497 – Special Topics in Systems Engineering
EMGT E561 – Failures of Engineered Systems
EMGT 467/567 – Economic Analysis of Engineering Projects
EMGT 462/562 – Risk Analysis and Management
EMGT E589 – Manufacturing Systems
MA 444 – Deterministic Models in Operations Research
MA 445 – Stochastic Models in Operations Research
ECE 370 – Energy Systems
ME 430 – Mechatronic Systems

Other Engineering Management courses can be considered in completing the minor. Additionally, Special Topics Courses must be approved as SE Minor Electives by SE Minor Advisor and Department Head of Engineering Management.

�鶻��Ʒ

Multidisciplinary Minors

Course Catalog 2022-23